Microfluidics refers to the science and technology involved in systems that use micropipes to process or manipulate tiny fluids. Because of its features such as miniaturization and integration, microfluidic devices are usually also called microfluidic chips, lab-on-chips and micro-total analysis systems. YW MEMS provide customers with a complete set of microfluidic chip solutions including design, processing, and testing.
For people
Universities, research institutions, corporate R&D, etc.
Device application
Microfluidic chips have been widely used in the fields of organic synthesis, microreactors and chemical analysis, clinical diagnostic instruments and in vitro biomimetic models due to their miniaturization and large-scale integration.
Process capability
*PDMS device
The machining accuracy depends on the accuracy of the mold. YW MEMS provide high-precision molds such as etching silicon, SU-8, and etching glass.
*SU-8 device
The glue thickness range is between 2-400um, the glue thickness to line width ratio is 1:1, and the accuracy error is less than 10%.
*Silicon runner device
The minimum line width is in the order of hundred nanometers, the flow channel is high in steepness, the line width accuracy is high, and the controllable accuracy is within 5%, and the maximum aspect ratio of the flow channel can reach 20:1.
*Glass runner device
IBE etching is used within 1um depth, the etching accuracy is within 10%, the aspect ratio is 1:1, and the processing efficiency is high.
The depth is 1-20um, and it can be etched by NLD. The etching has high etching rate, high uniformity, high plasma density and low voltage discharge.
Wet corrosion is used for depths above 20um, with high processing efficiency, and the aspect ratio is above 2:1. The line width is more than 200um, the precision is low, and laser drilling can be used.
Our advantage
Short processing cycle
efficient
Complete process capability
Service Enterprise
YW MEMS has provided microfluidic technology support for many well-known domestic universities, scientific research institutions, and corporate R&D institutions, and its mature and complete process capabilities have won unanimous praise from partners.
Contact information
Fan Gong: 13706135850
Sun Gong: 13706138151
On January 18, 2017, the corporate listing ceremony of Suzhou Equity Exchange Center was grandly held at the Dongsha Lake Equity Investment Center in the park. YW MEMS (enterprise code: 900107) successfully became the listed company. Premier Li Keqiang of the State Council presided over an executive meeting of the State Council on January 11 to determine policies and measures to standardize the de
On March 23, YW MEMS, an industry-leading independent research and development start-up company for bio-microelectromechanical (MEMS) chips, announced the completion of an angel round of financing of millions of yuan, invested by well-known domestic angel investors. After the completion of this round of financing, In-Situ Chips will focus on the emerging bio-MEMS chip market
YW MEMS (hereinafter referred to as YW MEMS) completed in November a tens of millions of Pre-A rounds of financing led by Zhiyou Jinmiao Fund, Kaifeng Venture Capital, and Dexun Investment. This round of financing is mainly used for the construction of pilot and mass production test plants for MEMS liquid flow sensors.The in-situ chip was established in 2015. In 2018, it received an angel round of
Links: Baidu | Phone: 0512-67266051 |
 | E-mail: sales-mems@ywmems.com |
 | Address：G202, No.338 Ruoshui Road, |
Copyrights YW MEMS © ICP 15018093-6 Su Gong An Bei NO.32059002002439 sitemap
